Path > Products > Concrete & Masonry Waterproofers

	WATERTITETM -LX  Mold & Mildew-ProofTM* Waterproofing Paint is a multi-purpose, latex-based concrete and masonry waterproofing primer and finish that is GUARANTEED to keep water out and mold & mildew away! It forms an impermeable barrier to water on any interior or exterior, vertical or horizontal concrete block, cast-in-place concrete and cementitious stucco. The ideal basement waterproofer, it prevents the growth of mold & mildew on the paint film for 5 years - guaranteed.
Locate Retailers
	WATERTITETM  Mold & Mildew-ProofTM* Waterproofing Paint has a unique oil-base formula that combines a state-of-the-art waterproofing resin with Portland cement to create a coating that stops up to 34lbs psi of water pressure. It also contains a mildewcide to prevent the growth of mold and mildew for a minimum of five years after application, making it great for basements and other masonry surfaces where mold and mildew can be problematic.
Locate Retailers
	WATERTITETM -LV  Waterproofing/ Concrete Masonry Paint is a low VOC, latex-base waterproofing paint that is guaranteed to stop water intrusion on interior or exterior, vertical or horizontal concrete and other masonry surfaces for 10 years. Slightly textured with Micro-Spheres, WATERTITE-LV is perfect for filling microcracks in porous block and stucco. It is an excellent waterproofer and block filler.
Locate Retailers
	WATERTITE™ Flexible Primer and Finish  is a high-build, moisture and mildew resistant coating designed with elastomeric qualities to expand and contract to fill hairline cracks in concrete and masonry surfaces. Ideal for use on exterior new and existing vertical concrete and masonry surfaces such as stucco, brick, tilt-up, pre-cast, poured-in-place concrete, CMU and cement block. Plus, it can be used on high pH surfaces without degrading the surface.
Locate Retailers
	WATERTITE™ Etch and Cleaner for Concrete and Masonry  is a sulfamic acid-based etching and cleaning solution. Ideal for removing tough, caked-on efflorescence and excess mortar build-up on concrete, stone, brick, tile and galvanized metal when mixed with warm water. It also provides a light surface etch to promote the coating penetration and adhesion over concrete and other masonry surfaces.
Locate Retailers
	WATERTITE™ Hydraulic Cement  for Concrete & Masonry stops water flow from active and non-active water leaks. It permanently seals deep cracks and holes in all grades of concrete. Developed for use prior to waterproofing or painting, this quick-setting formula creates a “watertight” seal in 5 minutes, even when water is present.
Locate Retailers
	WATERTITE™ Polyurethane Sealant for Concrete and Masonry  is a high performance, moisture curing polyurethane joint sealant that seals and waterproofs. This permanently flexible joint filler was developed for use on interior and exterior concrete and masonry surfaces. Elastic and non-brittle, it will not break or chip.
Locate Retailers
	Zinsser Premium Water Repellent Sealer  is a water-base, deep penetrating water sealer designed to provide long-lasting protection for a variety of outdoor surfaces, including masonry, brick, wood and concrete. This clear, one-coat formula gives these porous surfaces a water repellent barrier against moisture penetration and damage. Meets Federal Specification TT-W-572 requirements for Water Repellency and paintability.
Locate Retailers